E-link China Technology Co., Ltd.
ই-লিঙ্ক চীন প্রযুক্তি কোং লিমিটেড
পেশাদার ফাইবার অপটিকাল যোগাযোগ এবং সিসিটিভি নিরাপত্তা ট্রান্সমিশন পণ্য প্রস্তুতকারক

বাড়ি
পণ্য
আমাদের সম্পর্কে
কারখানা ভ্রমণ
মান নিয়ন্ত্রণ
যোগাযোগ করুন
উদ্ধৃতির জন্য আবেদন
ভিআর
বাড়ি পণ্যSFP অপটিক্যাল ট্রান্সসিভার মডিউল

LC Optical Interface 1000base Lx / T SFP Transceiver Module Low Power Consumption

চীন E-link China Technology Co., Ltd. সার্টিফিকেশন
চীন E-link China Technology Co., Ltd. সার্টিফিকেশন
The engineer solved our problem very quick, and the service is very good. Very professional factory.

—— Robert Lichtenstein-Canada

I had no concern, was buying and testing, so equipment is ok. So equipment and logistic is ok, we keep ordering and making business.

—— Anek – Thailand

I'm very satisfied with the media converter received, the OEM order quality is good.

—— Faize Akçaba-Turkey

E-link Sales are very professional, they give me not only product, but also solution. All E-link Fiber Media Converters and PoE Switches works well.

—— Patrícia Maia-Brazil

তোমার দর্শন লগ করা অনলাইন চ্যাট এখন

LC Optical Interface 1000base Lx / T SFP Transceiver Module Low Power Consumption

LC Optical Interface 1000base Lx / T SFP Transceiver Module Low Power Consumption
LC Optical Interface 1000base Lx / T SFP Transceiver Module Low Power Consumption

বড় ইমেজ :  LC Optical Interface 1000base Lx / T SFP Transceiver Module Low Power Consumption

পণ্যের বিবরণ:
উৎপত্তি স্থল: Shenzhen, China
পরিচিতিমুলক নাম: E-link China
সাক্ষ্যদান: CE, RoHS, FCC
মডেল নম্বার: LNK-SFP-10G-LR
প্রদান:
ন্যূনতম চাহিদার পরিমাণ: 1 piece
মূল্য: Negotiation
প্যাকেজিং বিবরণ: 1 piece in 1 carton box
ডেলিভারি সময়: 3-5 working days
পরিশোধের শর্ত: T/T, Western Union, MoneyGram, Paypal
যোগানের ক্ষমতা: 1000000000pcs/Month
বিস্তারিত পণ্যের বর্ণনা
Bit Rates: 1.25 Gb/ to 10.3 Gb/s Optical interface: compliant to IEEE 802.3ae
Electrical interface: SFF-8431 Hot Pluggable: Support
Distance: 10km Warranty: 2 years
লক্ষণীয় করা:

sfp bidirectional transceiver

,

cisco compatible sfp modules

10G SFP + 1310nm 10km LC Single Mode SFP Optical Transceiver Module

 

Features

  • Supports rate from 1.25 Gb/ to 10.3 Gb/s bit rates
  • Optical interface compliant to IEEE 802.3ae
  • Electrical interface compliant to SFF-8431
  • Hot Pluggable
  • 1310nm DFB transmitter, PIN photo-detector
  • Operating case temperature: 0 to 70 °C
  • Low power consumption
  • Applicable for 10km SMF connection
  • All-metal housing for superior EMI performance
  • Advanced firmware allow customer system encryption information to be stored in transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth
  • RoHS6 compliant (lead free)

 

 

Applications

  • 10GBASE-LR at 10.3125Gbps
  • Other optical links

 

 

Product description

This 1310 nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km.

The SFP+ 10km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

 

 

 

 

 

Absolute maximum rating

These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters Symbol Min. Max. Unit
Power Supply Voltage VCC 0 +3.6 V
Storage Temperature Tc -40 +85 °C
Operating Case Temperature Tc 0 +70 °C
Relative Humidity RH 5 95 %
RX Input Average Power Pmax - 0 dBm

 

 

Recommended operating environment

Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter Symbol Min. Typical Max Unit
Power Supply Voltage VCC 3.135 3.300 3.465 V
Operating Case Temperature TC 0 25 70 °C

 

 

Low Speed Characteristics

Parameter Symbol Min. Typical Max Unit
Power Consumption       1 W
TX_Fault,RX_LOS VOL 0   0.4 V
VOH Host_Vcc-0.5   Host_Vcc+0.3 V
TX_DIS VIL -0.3   0.8 V
VIH 2.0   VCCT+0.3 V
RS0,RS1 VIL -0.3   0.8 V
VIH 2.0   VCCT+0.3 V

 

 

 

Optical characteristics

The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

  Unit Values
Operating Reach m 10K
Transmit
Center wavelength (range) nm 1260 -1355
Side Mode Suppression Ratio (min) dB 30
Launched power
– maximum dBm +0.5
– minimum dBm -8.2 Notes1
  • OMA
dBm -5.2
  • OMA-TDP (min)
dBm -6.2
Transmitter and dispersion penalty dB 0 Notes4
Average launch power of OFF transmitter (max) dBm -30
Extinction ratio (min) dB 3.5 Notes2
RIN12 OMA (max) dB/Hz -128
Optical Return Loss Tolerance (min) dB 12
Receiver
Center wavelength (range) nm 1260-1355
Receive overload (max) in average power1 dBm 0.5
Receive sensitivity (min) in average power1 dBm -14.4 Notes3
Receiver sensitivity (max) in OMA (footnote 2) dBm -12.6 Notes3
Receiver Reflectance (max) dB -12
Stressed receiver sensitivity (max) in OMA2 dBm -10.3
Vertical eye closure penalty (min)3 dB 2.2
Stressed eye jitter (min)2 UIp-p 0.7
Receive electrical 3dB upper cutoff frequency (max) GHz 12.3
Receiver power (damage, Max) dBm 1.5

Notes:

  1. The optical power is launched into SMF
  2. Measured with a PRBS 231-1 test pattern@10.3125Gbps
  3. Measured with a PRBS 231-1 test pattern@10.3125Gbps BER≤10-12

4. In G.652 and G.655(NDSF)

 

 

Electrical characteristics

The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Parameter Symbol Min. Typical Max Unit Notes
Data Rate   1.250 10.3125 - Gbps  
Power Consumption   -   1000 mW  
Transmitter
Single Ended Output Voltage Tolerance   -0.3 - 4.0 V  
C common mode voltage tolerance   15 - - mV  
Tx Input Diff Voltage VI 400   1600 mV  
Tx Fault VoL -0.3   0.4 V At 0.7mA
Data Dependent Input Jitter DDJ     0.10 UI  
Data Input Total Jitter TJ     0.28 UI  
Receiver
Single Ended Output Voltage Tolerance   -0.3 - 4.0 V  
Rx Output Diff Voltage Vo 300   850 mV  
Rx Output Rise and Fall Time Tr/Tf 30     ps 20% to 80%
Total Jitter TJ     0.70 UI  
Deterministic Jitter DJ     0.42 UI  

 

যোগাযোগের ঠিকানা
E-link China Technology Co., Ltd.

ব্যক্তি যোগাযোগ: Mr. Michael Guo

ফ্যাক্স: 86-755-8312-8674

আমাদের সরাসরি আপনার তদন্ত পাঠান (0 / 3000)

অন্যান্য পণ্যসমূহ
ইথারনেট ইনজেকশনের উপর পাওয়ার

ই-লিংক গিগাবিট পাওয়ার ওভার ইথারনেট ইনজেক্টর 12 ~ 48 ভিডিসি পাওয়ার ইনপুট ডিআইএন রেল / ওয়াল মাউন্ট

একক পোর্ট 60W ইথারনেট ডিভাইসের উপর শক্তি দিনা রেল / ওয়াল মাউন্ট ইনস্টলেশন সমর্থন

10/100/1000 এমবিপিএস হাই পাওয়ার পো ইনজেক্টর 95 ওয়াট 802.3 বিট 100 মি ট্রান্সমিশন

48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W

ফাইবার অপটিক Extender উপর HDMI

Mini 4K HDMI অপটিক্যাল এক্সটেন্ডার আনকম্প্রেসড মাল্টিমোড USB ইনপুট 300M

4K এসএফপি এলসি 80 কিলোমিটার এইচডিএমআই ফাইবার এক্সটেন্ডার 10.3 জিবিপিএস একক মোড ফাইবার এক্সটেন্ডার

SFP 5VDC HDMI ওভার ফাইবার অপটিক এক্সটেন্ডার মাইক্রো 4K USB পোর্ট 80Km

4K*2K HDCP 10.3Gbps HDMI ফাইবার এক্সটেন্ডার SFP LC এক্সটার্নাল অডিও সহ

ফাইবার অপটিক কনভার্টার SDI যাও

ট্যালি ফাংশন বা আরএস 485 ডেটা সহ ফাইবার কনভার্টর এক্সটেন্ডারে মিনি 3 জি / এইচডি-এসডিআই

3G-SDI SDI ফাইবার অপটিক কনভার্টার ভিডিও এক্সটেন্ডার ফাইবার 20KM লং ট্রান্সমিশন

HD SDI To Fiber Optic Converter with Forward Audio

Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M

উদ্ধৃতির জন্য আবেদন

| সাইটম্যাপ

গোপনীয়তা নীতি | চীন ভাল গুণ ফাইবার ইথারনেট মিডিয়া রূপান্তরকারী সরবরাহকারী. © 2017 - 2024 fiberethernetmediaconverter.com. All Rights Reserved.