|
পণ্যের বিবরণ:
প্রদান:
|
| Fiber Channel: | 1.0625/2.125/4.25Gb/s | Gigabit Ethernet: | compatible |
|---|---|---|---|
| • 1310nm DFB Laser: | Support | SFP MSA SFF-8074i: | compatible |
| • Digital Diagnostic SFF-8472: | Support | Warranty: | 2 years |
| লক্ষণীয় করা: | cisco compatible sfp modules,fiber optic transceiver module |
||
4.25G Single Mode Dual Fiber 10km 1310nm SFP Optical Transceiver Module
Features
Applications
Description
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They are compatible with Fiber Channel per FC-PI-2 Rev. 10.0. also simultaneously compatible with Gigabit Ethernet as specified in IEEE Std 802.3.
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Power Supply Voltage | Vcc-Vee | 0 | 3.6 | V |
| Operating Case Temperature (Commercial) | Tc | 0 | 70 | °C |
| Operating Case Temperature (Industrial) | Tc | -40 | +85 | °C |
| Storage Temperature | Ts | -40 | +85 | °C |
| Operating Humidity | - | 5 | 90 | % |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | |
| Operating Case Temperature |
Standard Industrial |
Tc Tc |
0 -40 |
+70 +85 |
°C °C |
|
| Power Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Power Supply Current | Icc | 300 | mA | |||
| Data Rate | 4.25 | Gbps | ||||
Optical and Electrical Characteristics
Table 3 - Optical and Electrical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | ||
| Transmitter | ||||||||
| Date Rate | 4.25 | Gb/S | ||||||
| Centre Wavelength | λc | 1260 | 1310 | 1360 | nm | |||
| Spectral Width (-20dB) | ∆λ | 1 | nm | |||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||||
| Average Output Power (BOL) | Pout | -8 | 0 | dBm | 1 | |||
| Extinction Ratio | ER | 5 | dB | |||||
|
Average Launch Power-OFF Transmitter |
Pout | -40 | dBm | |||||
| Optical Eye Diagram | Fiber Channel Compliant | |||||||
| Optical Rise/Fall Time(20%~80%) | tr/tf | 130 | ns | |||||
| Data Input Swing Differential | VIN | 200 | 2400 | mV | 2 | |||
| Input Differential Impedance | ZIN | 90 | 100 | 120 | Ω | |||
| TX Disable | Disable | 2.0 | Vcc | V | ||||
| Enable | 0 | 0.8 | V | |||||
| TX Fault | Fault | 2.0 | Vcc | V | ||||
| Normal | 0 | 0.8 | V | |||||
| Receiver | ||||||||
| Centre Wavelength | λc | 1260 | 1360 | nm | ||||
| Receiver Sensitivity (BOL) | Sen | -18 | dBm | 3 | ||||
| LOS De-Assert | LOSD | -18 | dBm | |||||
| LOS Assert | LOSA | -28 | dBm | |||||
| LOS Hysteresis | 0.5 | 6 | dB | |||||
| Receiver Reflectance | -20 | dB | ||||||
| Data Output Swing Differential | Vout | 350 | 1800 | mV | 4 | |||
| Loss of Signal (LOS) Assert Time | TAssert | 500 | nS | |||||
| Loss of Signal (LOS) DeassertTime | TDeassert | 500 | nS | |||||
| LOS | High | 2.0 | Vcc | V | ||||
| Low | 0 | 0.8 | V | |||||
Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @4250Mbps, BER ≤1×10-12
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
| Parameter | Symbol | Min | Typical | Max | Unit |
| Tx Disable Negate Time | t_on | 1 | ms | ||
| Tx Disable Assert Time | t_off | 10 | µs | ||
| Time To Initialize, including Reset of Tx Fault | t_init | 300 | ms | ||
| Tx Fault Assert Time | t_fault | 100 | µs | ||
| Tx Disable To Reset | t_reset | 10 | µs | ||
| LOS Assert Time | t_loss_on | 100 | µs | ||
| LOS De-assert Time | t_loss_off | 100 | µs | ||
| Serial ID Clock Rate | f_serial_clock | 400 | KHz | ||
| MOD_DEF (0:2)-High | VH | 2 | Vcc | V | |
| MOD_DEF (0:2)-Low | VL | 0.8 | V |
Diagnostics
Table 5 – Diagnostics Specification
| Parameter | Range | Unit | Accuracy | Calibration |
| Temperature | 0 to +70 | °C | ±3°C | Internal / External |
| -40 to +85 | ||||
| Voltage | 3.0 to 3.6 | V | ±3% | Internal / External |
| Bias Current | 0 to 100 | mA | ±10% | Internal / External |
| TX Power | -9 to -3 | dBm | ±3dB | Internal / External |
| RX Power | -23 to -3 | dBm | ±3dB | Internal / External |
Digital Diagnostic Memory Map
The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration all are implemented, including received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring.
ব্যক্তি যোগাযোগ: Mr. Michael Guo
টেল: 19928768315
ফ্যাক্স: 86-755-8312-8674
ই-লিংক গিগাবিট পাওয়ার ওভার ইথারনেট ইনজেক্টর 12 ~ 48 ভিডিসি পাওয়ার ইনপুট ডিআইএন রেল / ওয়াল মাউন্ট
একক পোর্ট 60W ইথারনেট ডিভাইসের উপর শক্তি দিনা রেল / ওয়াল মাউন্ট ইনস্টলেশন সমর্থন
10/100/1000 এমবিপিএস হাই পাওয়ার পো ইনজেক্টর 95 ওয়াট 802.3 বিট 100 মি ট্রান্সমিশন
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
Mini 4K HDMI অপটিক্যাল এক্সটেন্ডার আনকম্প্রেসড মাল্টিমোড USB ইনপুট 300M
4K এসএফপি এলসি 80 কিলোমিটার এইচডিএমআই ফাইবার এক্সটেন্ডার 10.3 জিবিপিএস একক মোড ফাইবার এক্সটেন্ডার
SFP 5VDC HDMI ওভার ফাইবার অপটিক এক্সটেন্ডার মাইক্রো 4K USB পোর্ট 80Km
4K*2K HDCP 10.3Gbps HDMI ফাইবার এক্সটেন্ডার SFP LC এক্সটার্নাল অডিও সহ
ট্যালি ফাংশন বা আরএস 485 ডেটা সহ ফাইবার কনভার্টর এক্সটেন্ডারে মিনি 3 জি / এইচডি-এসডিআই
3G-SDI SDI ফাইবার অপটিক কনভার্টার ভিডিও এক্সটেন্ডার ফাইবার 20KM লং ট্রান্সমিশন
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M
